Browse

Viewing 51 items in DCC Controllers and Decoders


Digital Systems & Accs.


In Stock - +
Dynamis RailController PC software - for use with Bachmann Dynamis Ultima DCC controller
Currently out of stock
Combining the features of Dynamis with the Pro Box and more, Dynamis Ultima is the ideal system with which to begin your DCC adventure. Unlike the Pro before it, Dynamis Ultima is not an extension pack: it is a complete DCC system and is suitable for the beginner and the experienced DCC user alike. New features include a booster connection, which allows you to add additional power in order to divi…
Currently out of stock
Wireless handset for use with Dynamis Pro systems. A total of 4 wireless Dynamis handsets can be used with the Dynamis Pro system.
In Stock - +
To upgrade a Dynamis system (36-505) to Dynamis Pro system (36-506) specification. Features: Expands Dynamis Allows up to four wireless handsets to be used at any one time Service programming track output - power switched from main track automatically Allows all CVs to be read by Dynamis system Full service mode programming of Decoders Allows all CVs to programmed by Dynamis system Receiver expans…
In Stock - +
4 FUNCTION 21-PIN DECODER (Analogue Compatible) DCC decoder with four function outputs and back EMF in addition to the motor with a 21-pin connector. Size 25x15.5x4.5mm Short/long addressesing Advanced consist address and function support 1 Amp maximum power output BEMF Motor Control 4-function output with configurable function settings User configurable speed curve 14/28/128 speed steps 350mA fun…
In Stock - +
Accessory decoder with four outputs to power point motors, signals etc. Each output can be configured to provide a constant or pulse output. Additionally, two of the outputs can be configured to drive a standard RC servo. Can be used with any NMRA complying DCC system.
In Stock - +
N Scale One of the smallest decoders on the market. This decoder is designed to fit the NEXT18 DCC Ready locomotives. Measurements: Length: 15mm Width: 9.5mm Depth: 2.8mm Specifications: 0.7A Motor Current 1.5A Peak Current 4 Function Outputs 4 Logic Outputs
In Stock - +
0.8 Amp continuous Current 1.5 Amp Peak Motor Current 4 Function Outputs - Amplified (0.5 Amps Each / Total) plus 2 Logic, susi or Servo outputs Long Addressing Multiple Programming Options Consist Option (Double Heading) Railcom Compatible DC Operation User Defined Speed Curve Size – 14mm / 9mm / 2.5mm (smaller than previous model)
Currently out of stock
Brand: DCC Concepts Part Number: DCD-Z218 Scale / Type: HO / OO Scales Our Code: DCDCD-Z218 For Installation and CV information please follow this link to the Downloads page. The Dcc Concepts Zen 218 decoder is a very versitile decoder which takes away the choice of which decoder to buy for your new locomotive as it comes complete with both 21 and 8 pin plugs. Due to its size will fit in most OO/H…
Currently out of stock
Brand: DCC Concepts Part Number: DCD-Z360 Scale / Type: HO / OO Scales Our Code: DCDCD-Z360 The Zen 360 decoder has been developed to fit in almost any OO/HO locomotive irrespective of DCC socket orientation. As long as your locomotive has an 8 pin socket, this decoder will fit. This decoder has been designed with a twin PCB stacked one on top of the other so you only need to plug it in as it will…
In Stock - +
Brand: DCC Concepts Part Number: DCD-ZN68 Scale / Type: N / HO / OO Scales Our Code: DCDCD-ZN68 Much like its "bigger brothers" the N68 decoders have very smooth motor drive characteristics which allow for slow speed running even inside N scale locomotives. These decoders are small enough to fit in any N scale locomotive and with the 8 pin attachment you can use them on OO/HO scale locos as well.…
In Stock - +
This 6 pin direct plug decoder fits nicely into any locomotive fitted with an NEM651 socket. The decoder offers slow running characteristics and as it is the smallest decoder in the range you will always find places to house it. This pack includes a stay alive unit which are designed to aid your locomotives running characteristics during slow running. This unit basically keeps the decoder "alive"…
In Stock - +
Brand: DCC Concepts Part Number: DCD-ZN8D Scale / Type: HO / OO Scales Our Code: DCDCD-ZN8D The smallest 8 pin direct plug decoder in the range. This decoder is smaller than most blanking plates so fitting it into a locomotive will be very easy. This pack includes a stay alive unit which are designed to aid your locomotives running characteristics during slow running. This unit basically keeps the…
Currently out of stock
The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout. In most situations, the use of electrofrog points is recommended on digital layouts to ensure reliability but this can make extra switching more complicated than it needs to be. Allow us to introduce you to the Autofrog. Wiring the DCC80 is simple. There are three solder connections on the board,…
In Stock - +
N / HO / OO Scales For a newcomer to DCC or for the operation of a smaller layout, this system is a great choice. Comprising of a Base Station, Walkaround, and Power Supply, this system is packed with features but is above all, incredibly easy to use and allows you to run your railway without fuss. With 1.6 amps, there is enough power to keep things interesting but its best feature is its sheer ea…
Currently out of stock
PRODIGY ADVANCE2 consists of three elements. The POWER PACK transforms the power from your mains socket ready for the Base Unit. The BASE UNIT is the brains behind the operation. It contains all the technology you need to send DCC commands to your trains and accessories. However, short of turning the power on and off, you'll find your closest companion is the Walkaround controller which plugs stra…
In Stock - +
The DCC05 Prodigy WiFi receiver gives Android and iOS users the option to operate their Prodigy system with a smartphone or tablet. This means you have greater flexibility to control your layout, both alone and with multiple controllers. The Prodigy WiFi is compatible with the JMRI Engine Driver (Android) and WiThrottle (iOS) apps. Versions of both apps are free to download, so you can download th…
In Stock - +
DCC 8 pin plug Most suited to N Gauge locomotives. Key features of this standard decoder include smooth operation, 14/28 speed steps, plug and play, transponder id-equipped, all mode programming, decoder reset CV, motor isolation protection, advanced consisting, 2 and 4 digit addressing and DCC compatability. this decoder is rated at 1 amp (2 amp peak) with 2 functions at 0.5 amps and measures 10.…
Currently out of stock
Most suited to N Gauge locomotives. Key features of this standard decoder include smooth operation, 14/28 speed steps, plug and play, transponder id-equipped, all mode programming, decoder reset CV, motor isolation protection, advanced consisting, 2 and 4 digit addressing and DCC compatability. this decoder is rated at 1 amp (2 amp peak) with 2 functions at 0.5 amps and measures 10.6 x 8.7 x 2.86m…
Currently out of stock
Suitable N/OO/HO Scales Size: 18.5mm x 10.5mm x 4.8mm (0.73� x 0.42� x 0.18�) Power Handling: 1.1A Motor Drive (1.6A peak), 4 light/switchable functions - each 150mA, 200mA max. Addressing: Address 3 preset, will accept any address between 1 and 9999. Harnesses: 90mm overall length, removable 9 pin JST, 8 pin NEM652 plug with wires dressed to UK standard. DC Running: Allows running on both DC and…
In Stock - +
A really versatile decoder for use with locomotives that have 8 Pin or 21 Pin sockets. Dimensions: Length: 22mm Width: 16mm Depth: 5mm Harness Length: 75mm Specifications: Number of Functions: 4 Number of Pins: 21 (8 Pin Harness) Current Rating: 1amp / 1.8 Peak Address Range: 1 to 9999 Reset Value: CV8 to 8
In Stock - +
6 Pin decoder with plug-able 8 pin harness. This very versatile 2 function decoder is very small so it can fit in most locomotives regardless of space. Measurements: Length = 15mm Width = 8mm Depth = 2mm Harness Length = 55mm Specifications: Current Draw = 0.6a Max Current Draw = 0.8a
In Stock - +
Dimensions: Length: 15mm Width: 12mm Depth: 10mm Specifications: Number of Functions: 4 Number of Pins: 8 Current Rating: 1 amp / 1.5 amp peak Address Range: 1 to 9999 Reset Value: CV8 to 8
Bourton Model Railway - Fri Jul 19 04:36:32 BST 2019 [web4]