Browse

Mouseover to zoom or click to enlarge

Just Plug JP5655 Entry Wall Mount Lights - HO Scale

Product code: AA7053
£12.25
  • In stock
Quantity - +

Easy to install! Use on homes, business entry ways, garages and more.

20mA. RoHS Compliant.

2 Warm White LED Wall Mount Lights/pkg

Dimensions 0.193 in w x 0.197 in h (4.9 mm w x 5.0 mm h)

INSTRUCTIONS

Power with a Just Plug Light Hub (JP5701).

1. Determine desired placement of Street Lights. Mark locations with a pencil.

2. OPTIONAL: Feed wires on Main Pole through Extension

Pole. Insert base pin on Main Pole into Extension Pole,

aligning the conduit detailing on both poles. Make sure

wires do not get crimped in between the two poles.

Secure pole sections together with super glue.

3. For each Street Light, drill a hole through layout base

using a 3/32" (2.4 mm) drill bit. Drill holes parallel with

surrounding buildings.

4. Feed wires through hole, then insert base pin into hole.

When needed, secure Street Lights in position with

super glue.

5. Connect Light Set to Linker Plug. From each Street Light,

twist the prestripped section of red wires together and

black wires together (Fig. 1). Press and hold down the

red button, insert twisted red wires into hole until they

hit the back of the Linker Plug, then release the button.

Repeat with black button and black wires (Fig. 2). If

shortening length of wires, strip lacquer insulation from

all sides of wire with a hobby knife.

6. Plug the Linker Plug into a Light Hub LIGHT port.

Bourton Model Railway - Thu Jul 19 23:56:13 BST 2018 [web4]