Roco

For fixing geoLINE and Roco Line tracks with roadbed. Content of approximately 500 pieces per bag.

Universal TransformerOutput: 16 Volt, 50VA. For power supply, the following components: Verst�rker10764, booster 10765, Interface 10785, analog controller 10727 Overload protection, short circuit protected.

Multi-protocol operation possible (Motorola Digital, Analog AC, DCC Digital, Analog DC). Fully automatic, flying change of all 4 modes are possible. Motor control and motor frequency: 18.75 kHz. Support of braking distances. 14 steps at Motorola *- operation, either 14, 27, 28 or 128 steps for DCC operation. 9999 locomotive addresses programmable. NMRA - compatible. Easy change of operating parame…

Decoder with straight pins for six pin NEM 651 with load control. Particularly suitable for H0e / TT / N locomotives. Automatic detection DCC or analog DC. Automatic speed step identifier (14/28/128 steps). Driving frequency of 16 kHz engines Maximum motor current 700 mA up to two light outputs. BelastbarRangiergang 150mA short-circuit protected push-button F 4 ansteuerbar.Alle outputs Dimensions:…

Decoder with straight pins for six pin NEM 651 with load control. Particularly suitable for H0e / TT / N locomotives. Automatic detection DCC or analog DC. Automatic speed step identifier (14/28/128 steps). Driving frequency for motors 16 kHz. Maximum motor current 700 mA. Two light outputs max. 150mA load. Switching speed can be controlled by key F 4th All outputs are short circuit protected. Dim…

Connection of up to 8 solenoids, switches dual-coil actuators, signals or relay in two groups (1 to 4 and 5 to 8) is possible. Address range 1 to 256 All outputs are short circuit protected. Maximum switching current to 1.2 A. Separate programming button. Powered by the digital system. Dimensions 90 x 84 x 24mm.

Technical Data: 8 isolated inputs in two groups of switching contacts for connecting / switching tracks / track occupancy detector 8 red LED indicators Includes two RJ45 jacks for feedback bus . A connection cable for maximum feedback bus Stromaufanahme approximately 40mA connection only ROCOMOTION Art.Nr.10785 or multi-center No. 10832Abmessungen : 90x80x25mm

Track-occupied detector for 8 sections Occupied message by means of power monitoring of track sections RailCom-detector for loco identification Connection via CAN bus and R bus Configuration and update simply by app or PC via Z21

Control unit with many operation functions. Several WiFi-multiMaus can be simultaneously operated – possible with all Z21 systems. Controller Details: Wireless freedom Control of up to 9999 locomotives 1024 turnouts and solenoid articles Ergonomic one-hand operation for right and left handers Controller with center position Operated with commercially available standard batteries (3 x AAA, not incl…

The latest generation of digital command control is a ground-breaking system for DCC locomotives and digital components. Wireless communication is achieved using WiFi via a router (included) and by using a smartphone or tablet* with the Z21’s free App. *Apple iPhone, iPad and Android Devices Supported. Control your layout using your own smartphone or tablet Select your locos on sight rather than n…

Output: 18 Volt, 54 VA. To power the multiZENTRALEPRO 10832 Overload protection, short circuit proof, power feedback protection. Input 230v supplied fitted with 3 pin for UK

New, confirmable enabled decoder with wires and 8-pin connector, upgradeable, multi-protocol operation possible, motor control, support for braking distances; locomotive addresses programmable; NMRA-compatible, comfortable changing the operating parameters are possible: that is, not the engine must not be opened, and over-current protection; RailCom ** Features: 2x front light, 2x function Specifi…

Feedback-capable plug-in decoder with straight 6-pin plug, updatable, for DC and DCC operation, not for AC and Motorola *, motor control, support for braking distances; locomotive addresses programmable; NMRA compatible; overcurrent protection; RailCom ** Features: 2x front light Techn . Specifications: Engine 1000mA, light 200mA, total: 1000mA Dimensions: 12,9 x9x3, 4mm * Motorola is a registered…

Contents 50ml

HOe Scale Narrow  Gauge Steam start set complete with four bolster freight wagons with log loads. This set comes complete with Loco, Wagons, Controller and Oval of Track. Set Contents: 1 x Steam Locomotive 2 x Freight Wagons 4 x Straight Track Sections 12 x Curve Track Sections Analogue Controller

Locomotives and Rolling Stock: 1 x V200 Diesel Locomotive 1 x 1st Class Coach 1 x Two Compartment Coach 1 x Dining Coach Set Contents: 12 x Curves R3 1 x Feeder Section 8 x Straight tracks G200 1 x z21 digital controller with wireless router 1 x Power supply Controller Details: Differences between Z21 (Black Unit) and z21 (White Unit): A universal track output provides programming options on the m…

(rail joiners), 24 pcs. for Roco geoLINE and Roco LINE 2.1 mm (code 83) track.

matches the roadbed in colour and granularity.Real gravel.

The prototype, eight different freight cars of the German Federal Railroad (DB) in the operating state of the epoch III. Vorbildgrechten to simulation of mixed freight trains. All printed finely detailed model and epoch meet with NEM and close coupler mechanism

8 different freight cars of the DRG, epoch II. All with NEM coupling pocket

HO Scale ICE2 3 Car EMU with fitted camera in the leading coach. The camera can be linked with the Z21 to enable you to view your railway from a cab-eye view. A very interesting and unique set which allows you to drive your railway from inside the cab of a high speed EMU. This set comes complete with Locomotive, Track and Rolling Stock. The locomotive features an inbuilt Z21 which links directly w…

This track extension set creates an outside track oval to transform your starter set into a two track digital railway. Set Contents: 12 x Curves R4 4 x Straight Tracks G200 8 x Straight Tracks G185 2 x Left Turnouts with point motors 2 x Right Turnouts with point motors 1 x Electric Switch Machine and Decoder for retrofitting the point in starter sets 41502, 41503, 41504, 41505 and 41508

As a complement to 51250, this track extension set can be used for creating storage sidings which can hold three whole trains or a long rake of coaches / wagons. The locomotive can be uncoupled from the train using the uncoupling ramps and can then shunt the rolling stock further up the siding. Set Contents: 10 x Straight Tracks G200 1 x Curve Track 2 x Right Turnouts with Point Motors 3 x Uncoupl…