OO/HO Streamline Code 100 Track

These Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing power to the track. Supplied in packs of four pairs, each joiner has a short length of wire securely pre-soldered to it. The modeller just has to substitute the standard metal joiners for a pair of these where the power feed is required, and pass the wires…

OO Scale Metal Rail Joiners. For connecting rail ends together. Provides both maechanical and electrical bonding.

Available in Store Only Please call to check Stock OO/HO Track - Standard Gauge Supplied in 914mm (36in) lengths.

OO/HO Track - Standard Gauge Moulded in nylon for joining rail where an electrical break is required.

OO/HO Track - Standard Gauge 14mm (9/16in) long.

Peco's stainless steel scale rules should be in every modellers' tool box! Marked in scale Imperial measurements up to 50ft, extremely useful, for example, when building a scale model or positioning structures on a layout. In addition, each rule has markings to show the correct track spacings required for both Setrack and Streamline.

OO/HO Track - Standard Gauge Makes re-railing steam locos and bogie vehicles simple. Length of unit, 313mm (12 5/16in).

OO/HO Track - Standard Gauge Detailed model of the standard British railways type. Three plastic moulded parts which when assembled clip onto the rails.

OO/HO Track - Standard Gauge Extremely realistic - simulated wood grain mouldings with ballast textured surface on top. Recessed to take couplings.

OO/HO Track - Standard Gauge This easily assembled 5 part kit is designed primarily for use in storage sidings, facilitating the removal of a locomotive from the end of an incoming train and placing it at the opposite end. It eliminates handling the locomotive and prevents damage. The rails within the Loco-lift are automatically electrified when it is placed on the track and the whole train can be…

Roll of flexible track underlay approx. 5 metres (16ft 4ins) long Suitable for code 100 and code 75 streamline and setrack Please note No track or single underlay pieces included for illustration only

OO/HO Track - Standard Gauge Nominal radii: Outside, 1524mm (60in) Inside, 762mm (30in) Length: 256mm (10 1/16in).

OO/HO Track - Standard Gauge Nominal radii: Outside, 1524mm (60in) Inside, 762mm (30in) Length: 256mm (10 1/16in).

OO/HO Track - Standard Gauge Nominal radius: 1524mm (60in) Angle: 12º Length: 258mm (10 1/8in).

OO/HO Track - Standard Gauge Nominal radius: 1524mm (60in) Angle: 12º Length: 258mm (10 1/8in).

OO/HO Track - Standard Gauge Length; 249mm (9¾in). Nominal radius; 610mm (24in). Angle 12°.

OO/HO Track - Standard Gauge Nominal radius: 610mm (24in) Angle: 12º Length: 185mm (7 ¼in).

OO/HO Track - Standard Gauge Nominal radius: 610mm (24in) Angle: 12º Length: 185mm (7 ¼in).

OO/HO Track - Standard Gauge Crossing Angle 24º. Length: 127mm (5in).

OO/HO Track - Standard Gauge Angle: 12º Length: 249mm (9 ¾in).

OO/HO Track - Standard Gauge Nominal radius: 914mm (36in) Angle: 12º Length: 219mm (8 5/8in).

OO/HO Track - Standard Gauge Nominal radius: 914mm (36in) Angle: 12º Length: 219mm (8 5/8in).

OO/HO Track - Standard Gauge Nominal radius: 610mm (24in) Angle: 24º Length: 148mm (5 13/16in).