Track

The turntable is designed to operate with the Standard Train Controller R965. Drive the locomotive onto the turntable, then switch the power from track to turntable via the 'on-on' lever switch R046 (supplied with the set). Your speed controller now controls the rotation of the turntable. If you are using an HM2000 or HM4000 controller, then the turntable must be powered from the uncontrolled DC o…

Accessory for use in conjunction with Hornby Track. Plastic Buffer Stop. Clips to straight or curved track.

Accessory for use in conjunction with Hornby Track. These pins are designed to fix track to baseboard through holes ready drilled in each track section. Approximately 130 pins in a pack. Do not hammer pins down hard - you may distort the track. Not Suitable for under 14yrs

Accessory for use in conjunction with Hornby Track With spring-loaded buffers. Clips to straight or curved track.

Single track piece suitable for extending Hornby OO Train sets and layouts. Length 168mm

Single track piece suitable for extending Hornby OO Train sets and layouts. Length 335mm

Available in Store Only Please call to check Stock Single track piece suitable for extending Hornby OO Train sets and layout Length 670mm

Single track piece suitable for extending Hornby OO Train sets and layouts. 1st Radius 371mm arc 22.5�

Single track piece suitable for extending Hornby OO Train sets and layouts. 1st Radius 371mm arc 45�

Single track piece suitable for extending Hornby OO Train sets and layouts. 2nd Radius 438mm arc 22.5�

Single track piece suitable for extending Hornby OO Train sets and layouts. 2nd Radius 438mm arc 45�

Single track piece suitable for extending Hornby OO Train sets and layouts. 3rd Radius 505mm arc 22.5�

Single track piece suitable for extending Hornby OO Train sets and layouts. 3rd Radius 505mm arc 45�

Single track piece suitable for extending Hornby OO Train sets and layouts. Length 38mm

Single track piece suitable for extending Hornby OO Train sets and layouts. Length 168mm x 181mm angle 22.5� For parallel tracks use with 22.5� section curve or point.

Single track piece suitable for extending Hornby OO Train sets and layouts. Length 168mm x 181mm angle 22.5� For parallel tracks use with 22.5� section curve or point.

Accessory for use in conjunction with Hornby Track. Spring-loaded ramp clips into straight track at the position you choose, and automatically lifts couplings when the train is halted over the ramp. Set includes a marker post to help you align the coupling with the ramp underneath.

Accessory for use in conjunction with Hornby Track. Length 168mm Used to isolate track sections over both rails.

Accessory for use in conjunction with Hornby Track. Length 168mm

Available in Store Only Please call to check Stock Single track piece suitable for extending Hornby OO Train sets and layouts. Length 970mm Shape and cut to length as necessary. Fishplates not included.

Accessory for use in conjunction with Hornby Track. Pack of four sheets 267mm x 89mm each, for cutting and fitting under trackside accessories that have to be raised to the level of the track.

Single track piece suitable for extending Hornby OO Train sets and layouts. Radius 852mm arc 11.25� For use with R8076 'Y' Point

Accessory for use in conjunction with Hornby Track. Length 168mm. Comes with track moulded into the base at intervals to suit standard Hornby twin-track geometry. Supplied with traditional gates as shown and alternative modern barriers.

Accessory for use in conjunction with Hornby Track. Length: Approx. 4880mm long Designed to fit the width of single track with indentations to fit the sleepers. Strip is flexible to follow any straight or curved track, and is easily cut to make junctions at points and cross-overs. Resilient foam underlay fits under track to simulate a full-size ballast track bed. It also damps out vibrations, so t…