DCC Power & Control
£21.95
Out of stock
Standard Wall Plug Mains Transformer. - 220-240V 50-60Hz - UK only. Replacement transformer suitable for: R7229 Analogue Train and Accessory Controller
£10.95
Currently In Stock
Supplies the brief pulse of current that a point motor requires. Supplied with connecting wires.
£10.95
Out of stock
Designed to divert power from one circuit to another - eg. with R406 coloured light signals to switch from red to green and back again. It may also be used to switch power from one section of track to another and is the switch you use to operate turntable R070.
£10.95
Currently In Stock
Conventional on/off switch for R618 double-isolating track. Supplied with connecting wires.
£39.95
Out of stock
IMPORTANT - The decoder does not support sound under DC (analogue) operation. Sounds can only be played under DCC (digital) operation. This applies to all sounds, both running and spot sounds. The locomotive's motor may be controlled under DC operation. Function list F0 Headlight/rearlight F1 Steam/ Steam exhaust F2 Whistle long F3 Whistle medium F4 Whistle short F5 Whistle very short F6 Wheel sli…
£39.95
Out of stock
DCC 8pin Sound Decoder with speaker
£42.95
Out of stock
Hornby TTS DCC sound decoder with sounds for a LMS Stanier Princess Royal class 4-6-2 pacific locomotive. Designed by Sir William Stanier the small batch of Princess Royal class locomotives was the first of the new 4-6-2 pacific type locomotives for the LMS. The class was followed by the larger Coronation for which this sound decoder will also be suitable.
£23.50
Out of stock
2 Function Locomotive Decoder with NEM 651 6 pin plug
£15.95
Out of stock
As an alternative to Hornby R8250 Controller, the Analogue Train and Accessory Controller features an improved, heavier casing, as well as an additional uncontrolled DC output, with integral capacitor discharge unit (CDU) to support solenoid point motors. The Auxiliary output can also be used to power lighting on the layout up to a current of 150mA. A recessed reduction switch also limits the outp…
£15.95
Out of stock
The 4-pin decoder, previously only available as a spare (X9659), is compatible with the 0-4-0 W4 Peckett from the 2020 range.
£39.95
Currently In Stock
The decoder does not support sound under DC (analogue) operation. Sounds can only be played under DCC (digital) operation. This applies to all sounds, both running and spot sounds. The locomotive's motor may be controlled under DC operation. Function list F0 Headlight/rearlight F1 Background steam/exhaust/coasting F2 Whistle long 1 F3 Horn medium F4 Brake long 2 F5 Whistle 2 bursts F6 Wheel slip F…
£8.95
Out of stock
Electrical accessory for operating Hornby points requires a passing or momentary switch such as R044
£6.30
Currently In Stock
Housing for use with Hornby point motor R8015 when surface mounting
£39.99
Out of stock
IMPORTANT - The decoder does not support sound under DC (analogue) operation. Sounds can only be played under DCC (digital) operation. This applies to all sounds, both running and spot sounds. The locomotive's motor may be controlled under DC operation. Function list F0 Headlight/rearlight F1 Background steam/steam exhaust/coasting F2 Chime whistle F3 Screech whistle F4 Long chime whistle F5 Long…
£39.95
Out of stock
IMPORTANT - The decoder does not support sound under DC (analogue) operation. Sounds can only be played under DCC (digital) operation. This applies to all sounds, both running and spot sounds. The locomotive's motor may be controlled under DC operation. Function list F0 Headlight/rearlight (if fitted to locomotive) F1 Engine start/stop F2 Horn high-low F3 Horn low-high F4 Brake squeal F5 NOTCH up…
£39.95
Out of stock
IMPORTANT - The decoder does not support sound under DC (analogue) operation. Sounds can only be played under DCC (digital) operation. This applies to all sounds, both running and spot sounds. The locomotive's motor may be controlled under DC operation. Function list F0 Headlight/rearlight (if fitted to locomotive) F1 Engine start/stop F2 Horn low-high F3 Horn high-low F4 Brake squeal F5 NOTCH up…
£39.99
Currently In Stock
IMPORTANT - The decoder does not support sound under DC (analogue) operation. Sounds can only be played under DCC (digital) operation. This applies to all sounds, both running and spot sounds. The locomotive's motor may be controlled under DC operation. Function list F0 Headlight/rearlight F1 Background steam/steam exhaust/coasting F2 Chime whistle F3 Screech whistle F4 Long chime whistle F5 Long…
£39.99
Out of stock
IMPORTANT - The decoder does not support sound under DC (analogue) operation. Sounds can only be played under DCC (digital) operation. This applies to all sounds, both running and spot sounds. The locomotive's motor may be controlled under DC operation. Function list F0 Headlight/rearlight F1 Background steam/steam exhaust/coasting F2 Chime whistle F3 Screech whistle F4 Long chime whistle F5 Long…