Electrical & Accs
£25.00
Out of stock
The Dapol water tower brings a little fun back into the hobby. Dapol have provided a realistic series of sounds and a selection of voiceover comments, several of which involve the driver berating his fireman for mucking it all up. The highly detailed exterior of the model will not look out of place on any discerning modellers layout, with a non-motorised version available for the traditional model…
£25.00
Out of stock
The Dapol water tower brings a little fun back into the hobby. Dapol have provided a realistic series of sounds and a selection of voiceover comments, several of which involve the driver berating his fireman for mucking it all up. The highly detailed exterior of the model will not look out of place on any discerning modellers layout, with a non-motorised version available for the traditional model…
£31.35
Currently In Stock
Finely detailed semaphore signal. This signal comes ready made with working arm and led lighting in the appropriate colours to match signal. The arm raises and lowers slowly to add to the realism. To power this signal you will need a smooth 12v DC supply and a push to make switch
£19.95
Out of stock
Brand: DCC Concepts Part Number: DCD-Z218 Scale / Type: HO / OO Scales Our Code: DCDCD-Z218 For Installation and CV information please follow this link to the Downloads page. The Dcc Concepts Zen 218 decoder is a very versitile decoder which takes away the choice of which decoder to buy for your new locomotive as it comes complete with both 21 and 8 pin plugs. Due to its size will fit in most OO/H…
£26.95
Out of stock
Brand: DCC Concepts Part Number: DCD-Z360 Scale / Type: HO / OO Scales Our Code: DCDCD-Z360 The Zen 360 decoder has been developed to fit in almost any OO/HO locomotive irrespective of DCC socket orientation. As long as your locomotive has an 8 pin socket, this decoder will fit. This decoder has been designed with a twin PCB stacked one on top of the other so you only need to plug it in as it will…
£22.95
Out of stock
Brand: DCC Concepts Part Number: DCD-ZN68 Scale / Type: N / HO / OO Scales Our Code: DCDCD-ZN68 Much like its "bigger brothers" the N68 decoders have very smooth motor drive characteristics which allow for slow speed running even inside N scale locomotives. These decoders are small enough to fit in any N scale locomotive and with the 8 pin attachment you can use them on OO/HO scale locos as well.…
£22.95
Out of stock
This 6 pin direct plug decoder fits nicely into any locomotive fitted with an NEM651 socket. The decoder offers slow running characteristics and as it is the smallest decoder in the range you will always find places to house it. This pack includes a stay alive unit which are designed to aid your locomotives running characteristics during slow running. This unit basically keeps the decoder "alive"…
£22.95
Out of stock
Brand: DCC Concepts Part Number: DCD-ZN8D Scale / Type: HO / OO Scales Our Code: DCDCD-ZN8D The smallest 8 pin direct plug decoder in the range. This decoder is smaller than most blanking plates so fitting it into a locomotive will be very easy. This pack includes a stay alive unit which are designed to aid your locomotives running characteristics during slow running. This unit basically keeps the…
£9.95
Out of stock
Deluxe Materials Track Magic is a special liquid cleaning fluid for model rail & car metal tracks, electric contacts and wheels. Track Magic works by dissolving, and mobilizing microscopic oily contaminants to leave a clean conducting surface for smooth and steady running. Track Magic comes with several accessories: a microbrush to clean wheels, power collectors and points, a pad to apply to rail…
£7.90
Out of stock
Fast acting brush cleaner. Restores and revives brushes like new. Water miscible- no odour- non flammable. Safer for health & environment Brush Magic is a powerful, non flammable brush cleaner for the rapid cleaning of all types of wet or dried paints from paint & air brushes etc. Use also to clean up and remove of epoxy, polyester & polyurethane resins & glues before they are set. • Washes away w…
£7.50
Currently In Stock
A specially developed foaming cleaner that will effortlessly remove unsightly dirt and oily grime from non-porous surfaces on models, pit boxes, tools etc. This product is water based and non flammable, safe on paint/plastic film/metal, effectively cleans residues of glow/petrol/gasoline/diesel fuels and foams/stays on station for controlled working action.
£9.00
Currently In Stock
Softens and removes paint from plastic in minutes. Stays where it is applied. May be used on plastic, resin, metals etc. Non-corrosive & Non-flammable. A fast acting, spreadable, & controllable paint stripper that will soften and remove paints and primers, typically 5-15mins according to paint type. Instructions: Mask off area. Apply with brush or cotton bud and it goes to work straight away. Allo…
£5.95
Out of stock
Pack of 2 syringes and 3 sizes of stainless steel tips. Accurate application of R/C Modeller, Speedbond, Aliphatic Resin, Tacky and Decorator glues.
£6.50
Out of stock
For easy bonding of railway ballast and scatters. Ready to use. Rapid spreading. Clear matt finish. Super thin, ready mixed adhesive for bonding scenic granular materials e.g. model railroad ballast, coal and other scale modelling landscape products. Low viscosity and capillary action ensures rapid, efficient spreading with fast drying and minimal disturbance to the ballast scene. Instructions: Po…
£2.95
Currently In Stock
A Non- fogging, clear, foam-safe, cyano glue with a long shelf-life. If you are a plastic or railway modeller, you will be excited to hear that Deluxe Materials have released a pack of Roket Odourless ca adhesive. It is a non-fogging, clear cyano adhesive specially developed for bonding painted or clear plastics without marking or fogging . Roket Odourless AD85 is sold in a long metal tube pack an…
£6.50
Currently In Stock
Deluxe Materials Perfect Plastic Putty is a one-part, fast-drying, superfine filler with water clean up. It has good adhesion and sanding properties on plastic and is easily used, even in awkward areas. Perfect Plastic: dries quickly without cracks to an ultra smooth finish. fills deep cavities & takes paint easily has little odour
£6.80
Out of stock
Model Lite is a strong lightweight, non-shrinking filler for use on wood, balsa, foam, fibrglass etc. contents 240ml
£3.75
Out of stock
Carborundum discs ideal for precision cutting track. Use with GM630 Mandrel. Dia 22 mm x 0.6 mm 10 per Pk
£5.25
Currently In Stock
Carborundum discs ideal for precision cutting track with Mandrel. Dia 22 mm x 0.6 mm 10 per Pk with Mandrel
£7.95
Currently In Stock
this budget needle file set features 10 different profiles, medium cut and has many uses in finescale modelling and jewellery etc.
£4.15
Currently In Stock
Current draw for one bulb is approx 80ma
£4.15
Currently In Stock
Current draw for one bulb is approx 80ma
Electrical switches and wire, oil, track cleaning and accs